SicaSeal Enhance is a ready to apply, and enhancer for aggregate concrete and concrete pavers
Darkens mortar and enhances stone in aggregate concrete based materials
Provides superior water repellence
High wear resistance, long life
Non-film forming, allows breathability
Fungal and algal resistance
Does not peel or blister
Can be applied to a damp/wet surface
Suitable on both horizontal and vertical surfaces
Can be spray applied
Aggregate concrete based materials
Read the product information before application.
The surface to be treated should be clean and free of all contaminants.
The surface can be damp or wet, however SicaSeal Enhance should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.
Do not apply SicaSeal Enhance if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30oC. If necessary, cool the surface with water prior to application.
SicaSeal Enhance is ready to apply and should be mixed well before use.
A test prior to application must be performed to assess the suitability of the product.
SicaSeal Enhance may be applied using a saturated brush, roller, paint pad or a low-pressure hand sprayer. The surface should be uniformly applied to saturation point.
Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.
Additional coats of SicaSeal Enhance may be applied to achieve the desired effect. Recoat time minimum 2 hours. For recoat, the sealer can be applied as per the first coat. Ensure uniform coverage. Excess sealer must be removed before drying.
Any overspray on adjacent surfaces such as glass, metal or painted surfaces should be wiped clean with a damp rag before the sealer dries.
Full curing may take up to 3 days. Avoid traffic for at least 24 hours.
Equipment clean up can be performed with water.